FS25 AMLC FS25 VAC-CON Kit AR BODY V1.0
This beta release adds the Vac-Con Vacuum AR Body to FS25. It is an attachment bed rather than a truck, and it has been adjusted for FS25.
The trucks listed as pretested should fit this attachment. They worked the last time they were checked, and a hotfix will be released if that changes. If you know another AR body truck that may work with it, please let me know.
Required Mods:
- fs25 paccar pack by jacksepticraft
- Interactive control
Store Items
- Vac-Con Vacuum Body
- Short Nozzle, Long Nozzle, Long Nozzle with Teeth
- Vac-Con radio remote (hand tool)
Features
- At the end of the boom, the suction hose hangs while the boom swings, lifts, and telescopes.
- When the vacuum is running, the hose end collects dirt and liquids. Placing it in a pond or river refills the tank with water. Switching on the vacuum also increases the truck’s engine RPM.
- The pressure-washer lance comes from the hose reel. It sprays mud and uses water from the body’s own tank, which is filled at water stations. With TerraFarm installed, the jet digs soft ground at the point where it hits.
- Use the remote’s attach key to connect a nozzle to the suction hose end.
- For unloading, the tank can tip and the rear door can open, or the tank can empty through the rear hose.
- A pipe rack is fitted to the rear door. Its rack blocks can be switched, and its lockable clamps keep the pipes in place while driving. The rack follows the door’s movement.
- Lighting includes an LED or classic arrow board, side safety strobes with several patterns, spotlights, plus boom and rear work lights.
- The US-style rear end has round stop/tail/turn and reverse lamps, ID and clearance lamps, an ICC bumper, and mud flaps.
- There are storage cabinets, a control cabinet, and a remote cabinet, all with opening doors.
- Shop choices cover paint and trim colors, logos, white, color, or none, reel hose and reel frame colors, and the arrow board type.
Controls
- For the boom, select the body to use the crane controls: swing, raise / lower, and telescope. The hose reel uses the crane tool axis.
- Vacuum on/off: use the turn-on key, the PTO button in the control cabinet, or the remote.
- Unloading: use the tip key. The tip-side key selects either the rear door or the rear hose.
- Remote, within 50 m of the body:
- left stick: boom swing and boom up / down
- right stick: telescope and hose reel
- toggles: vacuum, unload, unload side, beacons/strobes, front reel swing
- attach key: connect the nearest loose nozzle to the suction hose, or take it off
- G: take the remote out of its cabinet or put it back, within 3 m of the cabinet
- The screen displays the link distance, vacuum state, tank level, and unload side.
- Water Lance: use the hand-tool key to take it from the hose reel or return it there, then spray with the hand-tool action key. It can also wash trucks.
- Interactive Control points, needs
FS25_interactiveControl: cabinet doors, PTO, strobe pattern, spotlights, left, right, boom, rear, all, arrow board modes, rack blocks, top/middle/bottom pipe clamps and the hose reel swing.
