FS25 Reinke Irrigation System V2 V1.1.0.0

FS25 Reinke Irrigation System V2 V1.1.0.0

This pack includes Reinke linear irrigation systems for flat, obstacle-free terrain, with widths from 37 meters to 223 meters. It also includes a 228-meter pipe, a 50-meter pipe extension, a pipe tool, and a Reinke irrigation unit equipped with a control panel.

Features

Reinke linear irrigation systems can be placed under the placeables menu.
Use the systems only on flat, clear land; do not use them on hilly or sloped ground.
Ensure there are no trees, utility poles, or other obstacles in the field that the machine could collide with during operation.
When placing the main 228-meter pipe and hydrant, expect a delay of about 6 seconds for it to spawn.
The game may log a warning for these components, but this is normal and does not affect gameplay; everything is 100% functional.
If the default 228-meter pipe and hydrant setup is not long enough, extend it with 50-meter pipe add-ons.
The pipes can be towed with a tractor via the 3-point hitch.
For handling and connecting pipes, use the Easy Development Control mod with “Super Strength” turned on.
Connect the pipes to the Reinke by pressing the Q key.
A pipe wrench tool is included. Clicking a single pipe piece with it instantly deletes the entire connected pipe network.
Open the water valve using the Interactive Control mod before entering the Reinke.
Press the G key to switch into vehicle control mode so Interactive Control inputs take effect.
Set Automatic Motor Start to No (disabled).
Turn on the Reinke using the Key icon.
The Interactive Control panel activates spraying / irrigation, beacon lights, the engine, and the GPS-like alignment corrector.
The GPS-like alignment corrector aligns the machine straight based on the set angle once cruise control is engaged.
When the Reinke finishes its run, turn off only the engine first. This instantly engages the brakes and holds it securely in place.
If cruise control/GPS is turned off before the engine, the machine will roll backward for a short distance. Always shut down the engine first to park it properly.

Specifications

Available widths: 37 meters, 75 meters, 115 meters, and 223 meters.
Main pipe and hydrant: 228 meters.
Pipe extension: 50 meters.
The 37-meter model is the affordable entry model.
Realistic prices.

Compatible with:

Changelog

V1.1.0.0
- Pump and hose compatibility has been removed.
- Only my own piping system and equipment are used.
- A control panel has been installed on the Reinke irrigation system, specifically the model with 1, 2, 3, and 6 spans. It is located on the right-hand side relative to the direction of travel.
- Realistic prices have been set.
- With the wrench, which is actually a hose tool, a left-click on the pipe deletes the entire connected piping system in a single click.
- The valve must be opened using the Interactive Control to operate the Reinke system; therefore, Interactive Control is required.
- With Easy Developer Control enabled, the pipes can easily be dragged around.
V1.0.0.3
- Supported pumps and hoses.
- Irrelevant scripts have been deleted.
V1.0.0.2
- Category name fix.
- Already specialization name error fix.

Author: honved4

This content was uploaded by website visitors. If you notice any mistake, please let us know.

Finding a game interesting after investing 300 hours into it can become a bit challenging. But with mods as long as there is a new update is assured, you are guaranteed a few more hours of new exciting gameplay. FS 25 Other Mods are one of the greatest upgrades and can make your game unique. Downloading and adding FS25 Reinke Irrigation System V2 V1.1.0.0 Mod to your game is not difficult at all - you simply need to save a file and run it.