FS25 Fluid System V1.2.0.0

FS25 Fluid System V1.2.0.0

Take control of liquid handling in Farming Simulator 25. Arrange the hoses, open the valves and switch on the pump to transfer water, slurry, digestate and other liquids between vehicles, tanks and storage.

Features

• Hands-on hose connections: couple hoses manually, connect several hoses for extended routes and keep them stored on suitable vehicles.
• Manual pumps and valves: operate PTO rotary-lobe pumps, slide valves and the control panel for each transfer yourself.
• Reversible pumping: use one setup either to fill or to empty.
• Spills: liquid escapes from open hose ends and creates slurry or digestate puddles. The host may disable spills.
• Coupler information: inspect a coupler to find out which liquids it accepts and which it supplies.
• Modder support: add Fluid System functionality to your own vehicles and placeables using a few XML lines.

Included equipment

• 8-inch suction hoses in 3 m and 5 m lengths
• Suction hose with steel intake, 1 + 2 m
• PTO rotary-lobe pump
• PTO rotary-lobe pump equipped with swivel elbows
• Wienhoff docking station
• Slurry storage connection with a manual slide valve

V1.2.0.0

• A redesigned graphical tank overview displays the source, destination, flow rate and pump controls.
• From the overview, operate the manual and powered valves of both tanks directly.
• Configured front-arm pumps have separate controls. Starting a booster also starts its assigned main pump.
• The connection setup now guides you step by step with a review page and 3D placement. Switching connection types keeps the settings.
• German and English labels, help text and navigation are clearer.
• The 8-inch storage connection supports water, slurry and digestate now.
• Pump warnings no longer show while you drive vehicles that are unrelated.
• Pump and connection messages are clearer and no longer use blocking dialog windows.
• Front-arm-to-tanker binding through the tractor has been improved. The connection section displays only the relevant valves.
• Hotkey operation without opening the menu has been improved. The F1 help menu shows the available actions.
• A new side HUD overview for tanks and pumps can be enabled or disabled in the settings.

V1.1.1.0

• Vredo integrations were added and connection positions were corrected.
• Lua errors and outdated fluid selections were fixed.
• The pump overview was simplified, while the debug display was expanded, including in the shop.
• Use Tab to select storage targets within a range of 50 – 100 m.
• The new XML option hoserot enables hose rotation.