FS25 Field Sprayer Cleaning System V1.0.0.0
After using the sprayer, this mod requires it to be cleaned unless you plan to use the same product again. Switching products takes time. It is intended to work with every sprayer, but not every model has been tested.
Semi-Realistic and Realistic use the same procedure. Their only difference is the required time. The tests worked perfectly, and reported errors can be adjusted.
Features
- Cleaning required:
Once used and emptied, the sprayer stays dirty. You may keep using the same product, while changing to another product requires cleaning. - Preparation:
Empty all spraying agent from the sprayer. Start the engine and unfold the boom completely for rinsing. - Filling with water:
At a suitable water source, pressR. Every cycle uses 15% of the tank capacity, then filling stops automatically. - Cleaner:
2,000-litre cleaner IBCs can be bought in the shop for €10,000 and placed beside the sprayer.
The three cycles are fresh water, water mixed with cleaner, and fresh water once more. - Cleaning:
PressCTRL + ALT + Pto start or pause cleaning. You must fill and start every cycle manually, because the following cycle does not begin automatically. - Select mode:
Select the mode through the options or withCTRL + ALT + M.
Realistic: Each cycle has 7 minutes of circulation and 8 minutes of emptying, then the sprayer is sprayed out.
Semi-realistic: Each cycle has 20 seconds of circulation and 30 seconds of emptying. - Quick drain and testing:
UseCTRL + ALT + Lto drain the water quickly without cleaning. - Display and controls:
The spraying overlay displays progress, times, water and cleaner. With the mouse cursor active, the overlay can be moved and resized.
The controls menu allows the keys to be changed.
