FS25 Universal Vehicle Sync V1.0.0.0

FS25 Universal Vehicle Sync V1.0.0.0

Universal Vehicle Sync enables synchronised unloading while driving with machines from every brand. The harvester sets the pace, and the tractor pulling the cart follows alongside beneath the unloading pipe.

Features

• Tractors and harvesters from every brand receive the new shop option “Vehicle Sync”. The option can also be added later in the workshop
• Within a configurable sync radius, the harvester driver establishes the connection and remains in control. The tractor driver may confirm the request and receives a small information window
• Steering and speed are handled by the system. The tractor steers, stops and reverses with the harvester and travels at the same speed
• While both machines are moving, the cart can be shifted forward, backward, to the left or to the right from either machine
• Any steering, braking or acceleration input in the tractor disconnects the sync immediately
• Both machines display the fill levels of the grain tank and the cart
• The side gap can be adjusted, so the tractor maintains its distance beside the machine and does not drive into it
• Select left, right or behind. The behind position is intended for the headland, and the nearest tractor in the same group is chosen
• Use the individual zero point to place the cart where it fits best and save that position, or restore the default position
• After a turn, path planning lets the tractor find its way back beside the harvester automatically. It drives around trees, buildings and vehicles
• With the pause button, the tractor waits while the harvester turns on the headland and joins again afterward
• With a fixed pipe, place the cart beneath a pipe that remains in position and fill it at the desired location
• Sync groups let you select in the menu which machines may connect to one another
• The control window can be moved and operated with either a mouse or a keyboard
• The menu contains a separate settings tab
• All key bindings are preset, can be changed in the controls menu, and can be hidden from the F1 menu

Default keys

• Left Alt + G: control window
• Left Alt + V: mouse cursor
• Left Alt + Y: connect / accept / disconnect
• Left Alt + arrow keys: move the cart
• Left Alt + O: change side
• Left Alt + I: reset position
• Left Alt + C: pause / continue
• Left Alt + L: fixed pipe
• Left Alt + W: set zero point
• Left Alt + Q: default zero point

This fan-made mod is inspired by real machine synchronisation systems. It is not affiliated with or endorsed by any manufacturer.