FS25 Hyper Realistic Maintenance 2 V3.1.5.0

FS15 Mods | FS17 Mods | FS19 Mods | FS22 Mods | FS25 Mods |
FS 25 Other

FS25 Hyper Realistic Maintenance 2 V3.1.5.0

Engines wear, oil becomes dirty and neglected turbos eventually fail. Hyper Realistic Maintenance 2 brings detailed, ongoing mechanical simulation to every motorized vehicle in your saved game, from tractors and trucks to harvesters and cars. The effects are part of gameplay, rather than merely cosmetic figures.

The DEF Pack mod is recommended for simulating the new DEF systems. The DEF Mod Pack and Variable Tire Pressure mods can be used together without compatibility problems. Additional translations are being developed.

Features

  • Engine: cylinder, piston, bearings, crankshaft and valves are 5 separate components that affect one another. As cylinder wear raises blow-by, the oil becomes contaminated and further wear is accelerated.
  • Thermal: load raises the coolant temperature, while a degraded radiator can cause the engine to overheat.
  • Fluids: oil level, oil contamination and coolant level can all be checked, and all require maintenance.
  • Transmission: the clutch, gearbox, turbo and battery/starter motor gradually wear.
  • Failures: once the relevant component reaches approximately 35% wear, the chance of failure rises sharply. Critical overheating above 118 °C is guaranteed and is not luck-based.
  • Behaviour by vehicle type: tractors, trucks, harvesters and cars deteriorate at different realistic rates.
  • Real power loss lowers the torque effectively available from the engine, and this can be felt while working in the field.
  • Real no-start conditions: a flat battery or worn starter motor can stop the engine from turning over in reality, with an on-screen warning.
  • Harvesters experience an actual reduction in threshing efficiency as engine condition worsens.
  • Scheduled maintenance covers 10 maintenance items, including engine oil, filters, hydraulic/transmission oil, coolant, grease, belts and much more. Every item has its own interval and a real farm cost, automatically adjusted to the vehicle’s actual power. Ignoring maintenance too long accelerates wear by up to +120%.
  • Vehicle HUD with 3 pages, covering an overview, detailed engine diagnostics and maintenance status. Its position can be adjusted in the game Settings menu.
  • The game’s repair screens, shop, farm workshop and mobile workshop now carry out a complete HRM2 service as well.
  • Works completely standalone.
  • If you also have the 4×4 Traction System mod, the mods recognize each other automatically. Driving with 4WD or the differential lock then gives the transmission a real additional effect.
  • Multiplayer has been significantly improved and tested on a real dedicated server. See the changelog for details and known limitations.
  • Maintenance progress is stored in the saved game.

Changelog

V3.1.5.0
Fixed: a flat battery could not be recovered because the engine would not start and the alternator therefore never charged it.
New: “Charge the battery” is available in the Daily care tab. When you are on foot next to the machine, it charges the battery to 90%.
A battery bought from the workshop now arrives fully charged.
After every completed workshop job, the machine is returned with at least 90% charge.
When starting, the weak battery message now explains where it can be charged.

V3.1.4.0
Fixed: the maintenance window, Left Alt + M, failed to open inside a vehicle. It now opens both on foot and while in the vehicle.
New: the instrument cluster is movable. In the window, select Settings > “Cluster position” > “Move with the mouse”, drag it into position, then use the right mouse button or Esc to finish. “Reset” returns it to its original position.
Fixed (multiplayer): cluster position, cluster size, cluster on/off and work sounds are now stored separately for every player. Previously, the server and savegame overwrote these settings for everyone.

V3.1.4.0
HRM2 ULTRA, complete rewrite: every part is simulated like the real machine.

  • Each machine is assembled from its real parts, including engine internals, injection, turbo, after-treatment EGR / DOC / DPF / SCR, cooling, electrics, transmission, hydraulics, PTO, brakes, steering, tracks and EV parts. Every part has its real service life, wears according to what the machine actually does and fails in its own way through 4 stages.
  • Engine oil has real chemistry, with viscosity, soot, fuel dilution, glycol, TBN and wear metals, plus laboratory oil analysis.
  • The thermal model includes thermostat, radiator fouling, boiling and ECU protection. In the game, warm-up is faster, at about 1 °C every 4 s at idle. A parked engine cools according to the game clock, taking about 1 hour to lose half its heat.
  • Battery / alternator, glow plugs and cold starts, hot shutdown damage on turbos, DPF regeneration, passive, active and parked, and DEF inducement.
  • Machines equipped with an ECU have J1939 fault codes. Older machines are diagnosed from smoke, noises and gauges.
  • Workshop: service packs at 500 / 1000 / 2000 / 3000 h, inspections, repairs, overhauls, parts quality with delivery times, dealer, mobile mechanic or do it yourself, plus opening hours.
  • The game’s workshop “Repair” button begins a dealer job and opens the HRM2 window on the Workshop tab. The job displays when parts arrive, the workshop work and when the machine will be ready, today / tomorrow at hh:mm.
  • Workshop jobs and parts deliveries follow the game clock. Time can also be accelerated from the HRM2 window with “Time speed – / +”, making them finish sooner. Parked machines continue progressing.
  • Daily care on foot includes a walk-around, greasing, draining the water separator, blowing out the radiator and air filter, and topping up fluids. The bar fills immediately after the care is done.
  • Workshop sounds include a ratchet for your own work, an impact wrench at the dealer, oil pouring, a grease gun and compressed air when filters are blown out. These sounds can be switched off.
  • Fluids included: DEF tanks, 5 000 / 10 000 / 15 000 L, plus pallets of 5 L engine oil 15W-40 and hydraulic oil UTTO cans, 56 x 5 L. When you top up or change oil yourself, a pallet near the machine is used first. Empty cans disappear.
  • Implements and trailers are covered too: shares, tines, discs, knives, knotters, chains, PTO shafts, gearboxes, bearings and brakes. Worn tools increase the draught.
  • Real machine hours are read under load. A 3000 h tractor is no longer like new. The hour meter appears on the instrument cluster and in Zasty HUD.
  • Reads the 4×4 Traction System: using 4×4 or diff locks wears differentials, final drives and the front drive shaft.
  • Realistic exhaust smoke, failure noises using the machine’s own sounds, brand reliability, used machines with hidden faults and farm parts store.
  • New windows with the camera locked while they are open, along with an instrument cluster of its own containing 16 warning lamps.
  • Singleplayer, multiplayer and dedicated servers.

KEYS (default)
Left Alt + M: Maintenance window, in the cab, or on foot next to a machine.
Left Alt + N: Show / hide the instrument cluster.
These are the default keys. If one of them is already used by the game or by another mod, go to Options > Controls and set the key you prefer, to avoid conflicts.


Author: zasty chalk, robster76
This content was uploaded by website visitors. If you notice any mistake, please let us know.


Finding a game interesting after investing 300 hours into it can become a bit challenging. But with mods as long as there is a new update is assured, you are guaranteed a few more hours of new exciting gameplay. FS 25 Other Mods are one of the greatest upgrades and can make your game unique. Downloading and adding FS25 Hyper Realistic Maintenance 2 V3.1.5.0 Mod to your game is not difficult at all - you simply need to save a file and run it.



You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *