FS25 Fluid System V1.1.1.0
Take direct control of liquid handling in Farming Simulator 25. Arrange the hoses, open the valves and run the pump to transfer water, slurry, digestate and other liquids between storage, tanks and vehicles.
Features
- Real hose connections let you couple hoses by hand, connect several for longer routes and store them on vehicles that are equipped for them.
- Operate the pumps and valves yourself, including PTO rotary-lobe pumps, manual slide valves and a control panel for each transfer.
- The same setup works in both directions, so you can fill or empty.
- Spills occur when hose ends are open, creating liquid loss and slurry or digestate puddles. The host can disable spills.
- Inspect a coupler to find out which liquids it accepts and which it supplies.
- Modders can add Fluid System support to their own vehicles and placeables using a few XML lines.
Included equipment
- 8-inch suction hoses in 3 m and 5 m lengths
- Suction hose with steel intake, 1 + 2 m
- PTO rotary-lobe pump
- PTO rotary-lobe pump with swivel elbows
- Wienhoff docking station
- Slurry storage connection with manual slide valve
Changelog
- V1.1.1.0
Vredo integrations were added and connection positions were corrected.
Lua errors and outdated fluid selections were fixed.
The pump overview was simplified, while the debug display was expanded, including in the shop.
Use Tab to select storage targets, with a range of 50 – 100 m.
The new XML optionhoserotenables hose rotation.
