



FS25 FarmPilot V1.0.5.6
FarmPilot is an autonomous mod that takes care of farm work by itself. You choose the field, the tool and the field that follows, then FarmPilot connects the whole process. It collects the tool, hitches it, drives to the field, works there, refills when necessary, returns, parks the tool in its assigned place and continues with the next field. You run the farm while FarmPilot handles the work.
Features
- Autonomous mode: the farm can operate on its own.
- From the shed to the field without your input: the selected tool is collected, including reversing, hitching, hoses and PTO. The vehicle drives to the field and starts the field’s Courseplay course at the correct width.
- Field after field: the HUD displays the next field and the next tool. Once a field is finished, the tool returns to its place, the tractor takes the next one and drives to the following field.
- Seeders: each field has its in-season crop and refill zone. The seeder is filled before departure. If it becomes empty, it leaves the field, refills from pallets, big bags or silos, returns and continues from the last point.
- Spreaders and sprayers: choose the product, the amount as “Full” or “Just enough”, and the refill zone. Remaining product is kept when the next field needs the same product. Otherwise, it is emptied into big bags or IBCs.
- Baler: follows the route made by the combine or windrower before it.
- Bale trailer: picks up every bale, whether wrapped or unwrapped, unloads them at the selected sale or storage zone and returns while bales remain.
- Trailers: a farm trailer is attached at the beginning and returned to its place at the end. At delivery, the trailer is exchanged.
- Combines and forage harvesters: unloaders form a queue on harvested ground at the field edge, remain beneath the pipe during unloading and do not enter standing crop. The forage harvester is followed from behind, including headland turns.
- Parking button: all attached tools are parked in their places, the spreader is emptied and the tractor then parks.
Driving
- Head-on passing: one vehicle pulls aside while the other reverses, following traffic rules on tracks.
- Obstacles, posts and poles are avoided, using a forward or reverse manoeuvre where the space is too narrow.
- Turns use the actual radius of the combination, with suitable speed and indicators activated at the correct distance.
- Secondary and tertiary roads are used only when they provide a time saving.
- The vehicle waits for tools to fold before departing and leaves fields without crossing the crop.
- Vehicles queue and use the weighbridge without overtaking.
The complete former AutoDrive Addon is included: weighbridge, indicator before turns, engine stop delay, lights with the engine off, rear implement and an individual “empty silo” timer for each vehicle. A truck may wait at the field edge until it is filled.
Disable FS25_AutoDriveAddon if you had it.
Even without Courseplay, FarmPilot remains a complete AutoDrive, including combine deliveries, loading and unloading. In Autonomous mode, it can wait or hand control over to the game worker, according to your choice.
Changelog
- V1.0.5.6
- Trailer tarps: open only when entering the field and close when leaving it; forage harvester unloading.
- Root harvesters, including beets and potatoes: trailers position themselves beneath the pipe and unload properly, with a more reliable field exit toward the next trailer.
- Equipped combine or forage harvester alone in Autonomous mode: its header is collected from the trailer, taken to the field and stored at the end. Everything concerning the combine is a V1; the concept will be improved.
- Secondary, tertiary and new “access road” types: a gear wheel selects which vehicle types can use them; road settings are located in the general settings.
- HUD: the “Drive – <goal>” title explains what the vehicle is doing, “AD” is no longer shown in texts, the HUD is fixed at the bottom, the red message uses 2 lines, and an “Editor reminder” window is available.
- Automatic tyre change with AutoSwitch: the threshold is set per vehicle, and the vehicle drives to the workshop as it does for repairs.
- Spreaders: leftover material is returned or sold, using an adapted loading point and trailer. “Collect and deliver” continues after a partial load.
- Driving: turns are more accurate, an indicator is used at network intersections with a Yes/No setting, and beacon lights and the Patriot 4450 ramp are included.
- Complete in-game help with F1; the “Field” line returns to “none” once parked; swaths and fold are available on purchase.
- V1.0.1.3






