FS25 New Holland Pack v1.2
New: Engine Configurations:
– 5.80, 590, 680, 690, 780, 780 (40 km/h), 790, 790 (40 km/h), 870, 870 (40 km/h), 880, 880 (40 km/h), 890, 890 (40 km/h), 8090 (40 km/h).
– The engine configurations have different horsepower. You can choose a smaller engine when you’re starting out and then upgrade to a larger one as your farm grows.
– However, keep in mind that a smaller engine with a large header is more prone to clogging.
– All 40 km/h combines will have a “40” sign on the left side at the rear if you have attached the warning signs.
– Each engine configuration name will be displayed on the combine.
Interior:
– All three monitors now have a startup screen with animation.
– The steering wheel from the CR11 has been installed.
– The passenger seat now has the New Holland logo embroidered in yellow.
Wraps (Decals):
– The grain tank now features “My LU” wrap, “My New Agricultural Machinery” wrap, and a “Forbidden Mods” wrap.
– Each wrap offers a discount on the combine harvester in the shop.
– The New Holland logo is now available as a sticker/wrap on the sides (black or silver).
– The 3D CX logos can now be deselected (Tiger = off, New Holland = on).
– A 3D CX logo has been added to the front door of the grain tank.
Changes/Improved:
– The straw chopper now distributes the straw in sync with the animation, instead of just in a straight line.
– The large “Hektajäger” sign is now correctly positioned.
– The IC points for starting the threshing unit and starting the header have been corrected.
– The IC points for starting the threshing unit and header have been corrected. All flags are now on one configuration post (roof & shield).
– This pack includes a New Holland CX 7.70, a 28ft Varifeed, a 41ft Varifeed, and a corn header. It also features numerous interactive control points, a blockage system (for when the load isn’t monitored), pipe and grain tank configurations, color selection, work cameras, a passenger seat in multiplayer, and many more shop configurations.
The New Holland Pack includes:
– A New Holland CX 7.70 with many realistic interactive control points
– A 28ft Varifeed header, which also has interactive control points
– A 41ft Varifeed, also with interactive control points, and a corn header.
Combine
– Exterior interactive control: Move the straw chopper forward/backward, fold the ladder in/out, attach/detach the PTO guard on the left side, and attach/detach the front guard.
– The New Holland Pack includes: Internal IC: Fold ladder in/out, turn all monitors on/off, switch between 4 main monitor displays (which also have additional IC points), turn beacon on/off, turn front/rear/pipe lights on/off, wiper wipers wipe once, open/close grain tank, start/stop engine, turn threshing drum (cutter) on/off, pipe fold in/out.
– Configurable in the shop: New Holland logos, warning LEDs, additional LEDs on the sides, anti-Claas, John Deere, and Case decals, DjB decals (offer a discount), advertising on the roof (Häckterjäger, DjB [discount], Forbidden mod [discount]) or New Holland, tires, straw chopping width [between 9.15m and 12m], warning signs, pipe length [small, medium; Large, passenger, rotating beacon, tiger decal, door sticker, cooler, warning LEDs on the warning sign & grain tank size
Varifeed 28ft:
– 8.5 meters
– In the shop: Old crop dividers, rapeseed table, new crop dividers & Claas, Case, Fendt, John Deere, New Holland (with blue logos) and New Holland (with new logos) paint scheme. LEDs, DJB decal.
– IC: Fold old crop dividers in/out, attach/detach blade guard on rapeseed table.
– Varifeed 41ft
– 12-meter working width
– In the shop: Old crop dividers, rapeseed table, new crop dividers & logos.
– IC: Fold old crop dividers in/out, attach/detach blade guard on rapeseed table.
– Corn header: Standard (out of the game).
– IC: Also added in the new versions: New realistic blockage system with load-dependent activation (message appears when a blockage occurs and again when the blockage is cleared) [idea by dj-netti] Manual unblocking via Interactive Control (recognizable by a new icon at the rear of the straw chopper)
– New warning symbols and buzzer for blockages
– Dust effect during unblocking
– Alarm indicator at 85% fill level (briefly illuminates on the DBL dashboard)
– New road mode with a maximum speed of 42 km/h (unfolding or starting the combine is not possible in road mode. A message flashes when attempting to do so)
– Field mode with automatic working speed limiter (field mode reduces the maximum speed to 20 km/h and allows unfolding and starting the combine)
– Threshing unit: To activate a header, the threshing unit must first be activated. Attempting to start the header without the threshing unit will result in a message: Speed too low.
– Enhanced Interactive Control features: Switch between field and road modes in the cab. Unblocking function on the straw chopper. New ladder: fold in/out and rotate.
– New folding and rotating ladder configurable in the shop.
– Flexdraper FD250 header added as a combination.
– Passenger seat added in multiplayer – cooler/passenger no longer selectable.
– Color selection added.
– Without a header, the feeder can be raised and lowered (key assignments are freely configurable).
– The Varifeed 41ft now has a camera on the left side. The image is visible in the cab.
– New Holland 3D logo selectable from the CR11.
– Removable wheels via IC, with sound and custom icons for roleplay, for example.
– Dashboard built to be compatible with Live. (Template from Case Axial Flow 150 Series. Thanks to Doofy for permission.)
– Pipe end now adjustable via mouse control with sound and visible hydraulics.
– Tire pressure control system installed with its own sound (you can hear escaping air when deflating, and a compressor when inflating). The Tire Pressure Control System mod is required for this.
– Rotating beacons have been added. Selectable options are: 3 large rotating beacons, 3 large flashing LEDs, 3 small rotating beacons, 3 small flashing LEDs, or only 2 large rotating beacons (rear + center on the roof).
– Work cameras that display a live image on the new monitor in the cab. (Rear reversing camera, 2 on the pipe and one on the drawbar.
– Optical cameras for decoration: 2 on the pipe and one at the rear of the vehicle.
– Engine configurations: 5.80, 590, 680, 690, 780, 780 (40 km/h), 790, 790 (40 km/h), 870, 870 (40 km/h), 880, 880 (40 km/h), 890, 890 (40 km/h), 8090 (40 km/h).
– 40 km/h sign on the 40 km/h version with attached warning signs.
– Monitor startup animation.
– New main monitor from the CR11.
– 3D CX logos.
– CR11 driver’s seat.
– Various stickers; some offer a discount with purchase.
– Grain tank warnings at 85% & 95%.
– Color selection.
