





FS25 Water Pump Pack V1.4.2
Water Pump Pack V1.4.2 adds 7 rotary lobe pumps, connectable hoses and a complete fluid transfer system to Farming Simulator 25. Water can be collected from lakes, rivers, tanks or MapFlood floodwater, then transferred and pumped into vehicles, containers or other bodies of water.
Features
- Rear-mounted three-point hitch
- Front-mounted three-point hitch
- Skid for forklifts
- Frame for crane lifting
- Pump station for roll-off containers
- The drive uses either the PTO or a diesel engine, depending on the model.
- Each hose can be picked up, carried, laid out, extended and connected to another hose separately.
- Every hose uses its own physics and features smooth bends with sturdy couplings.
- Blue = suction side
Red = pressure side - Sources supported: lakes and rivers, MapFlood floodwater, tanks and trailers
- Liquids supported: water, milk, slurry, digestate, liquid fertilizer, herbicide, diesel, AdBlue, oils and other liquids
- On the pressure side, vehicles, tanks and unloading points can be filled. Liquid can also flow directly from a free hose end.
- When MapFlood floodwater is pumped out, it is correctly taken into account.
- Several pumps may be connected in series by linking the pressure outlet of one pump with the suction side of the next.
- With every pump active, their flow rates are added together. This also allows longer transfer lines to be built.
- Interactive Control
- Attach Implements Manually
- Realistic Exhaust Smoke
- Original GIANTS diesel sounds
- Pump and hose colors can be selected freely
- Dedicated shop category: Water Pumps & Hoses
Specifications
- Diesel tank for roll-off container: 400 litres
- PTO pump operating range: 350 to 1,000 RPM
- Maximum suction height: 8.5 m
Controls
- Left Alt + 1/2: Start/stop engine
- Left Alt + 3/4: Turn pump on/off
- Left Alt + 5/6: Change RPM
- Left Alt + 7: Refuel diesel
- Left Alt + N: EMERGENCY STOP
- Left Alt + 8: Connect/extend hose
- Left Alt + 9: Connect/disconnect coupling
- Left Alt + 0: Stow hose
- Left Alt + V: Stow all hoses
Displays show the RPM, flow rate, pressure, vacuum and fuel level.






