

FS25 Real Power Train V1.5.1.0
Real Power Train brings realistic CVT and transmission management to the game. It includes brand-specific transmission profiles, hand-throttle control, power-split efficiency, engine-load behavior, hydraulic effects and multiplayer support.
Features
- Each brand has a realistic CVT setup: Fendt Vario and MF Dyna-VT use 2 manual ranges, field and road, which can only be changed while standing still. CVXDrive, Case IH, Steyr and New Holland, JD AutoPowr, CLAAS CMATIC, Deutz TTV, Valtra Direct and Kubota KVT use 4 automatic ranges with almost unnoticeable shifts.
- Engine and transmission management offers Auto, with economy and low rpm at transport speed, and Power, with a load limit and acceleration ramps from 1-4.
- The hand throttle has two rpm memories, A and B. They are saved with the savegame, like on real tractors.
- Power-split efficiency models greater losses in the hydrostatic section, affecting pulling force and fuel use.
- When the PTO is working, the engine drops slightly under load instead of remaining locked at PTO rpm.
- For tipping, loader work, linkage use and folding, the hydraulics increase engine rpm and then return it to idle afterwards.
- Use the own window with
Left Alt + P. Its Transmission tab displays live rpm and target, engine load, efficiency, hydrostatic share and a range strip. The Settings tab contains the modules, which vehicles, the CVT profile for each brand and settings applied at once. The Panel tab controls on or off, text size and mouse movement. - The CVT module switches itself off when CVT Addon, RealismAddon Gearbox or VCA is active.
- Zasty HUD displays the range and hand throttle. When the HUD is active, the panel is hidden.
- Multiplayer is supported.
Keys
Left Alt + P: Real Powertrain windowLeft Alt + Up / Down arrow: Hand throttle, hold
These are the default keys. Should the game or another mod already use one of them, open Options > Controls and choose a different key to prevent conflicts.
Changelog
- V1.5.1.0
New: an inching pedal for CVT tractors. It behaves like the left “clutch” pedal on a real CVT tractor. Its default key isSpace, and it can be changed in Controls under “Inching (CVT clutch pedal)”. Hold the key to slow the wheels smoothly until they stop. Release it to restore driving smoothly, without a jerk. Short taps move the tractor forward little by little. The wheel drive alone is cut, while engine rpm, PTO and hydraulics continue running. For example, a baler continues tying the bale while the tractor is standing still. Inching overrides the accelerator and maintains speed and cruise control. It is useful with balers, front loaders, when creeping toward a pallet and during headland turns. While active, the HUD displays an INCH % chip. Fixes: New Holland tractors now use their own Auto Command transmission. Previously, they displayed Case IH’s CVXDrive. Long texts cut with “..” no longer break accented letters. - V1.4.0.0
New: PTO by hand throttle. Activating a PTO implement no longer locks the engine at PTO rpm. The engine remains at idle or at the hand-throttle setting, while you set the rpm yourself with the hand throttle or the A/B memories. Standard PTO, 540/1000, requires about 85-95% of the tractor’s max rpm. Eco PTO, 540E/1000E, uses about 70-75% and is selected automatically for tedders, rakes and spreaders. Rotors and PTO shafts rotate with engine rpm. If the engine falls below about 78% of the PTO rpm, the implement operates more slowly and a “Low PTO rpm” warning appears. A PTO % chip is shown on the panel. The function is enabled by default in Realistic mode and disabled in Arcade. It also has a separate switch in Settings,Left Alt + P. The AI helper retains the game’s normal behaviour. Compatibility with Real Vehicle Dynamics: with both mods active, keep speed and the game’s cruise control hold the speed again. - V1.3.1.0
New: hydrostatic transmission. Combines, forage harvesters, telehandlers and other non-tractor machines that have a continuous transmission are now identified as hydrostatic. Their gears 1-4 are changed while standing still instead of using a tractor CVT profile. - Fixed: with the engine running, CVT oil temperature no longer falls below about 40 °C. The oil cooler thermostat is now simulated, remaining closed up to 42 °C and fully open at 60 °C.
- The “cold oil” warning now appears below 40 °C.






