

FS25 Real Power Train V1.4.0.0
Real Power Train brings realistic CVT operation, engine and transmission management, hand throttle control, power-split efficiency and hydraulic load simulation to the game. Multiplayer is supported.
Features
- Brand-specific realistic CVT behavior: Fendt Vario and MF Dyna-VT use 2 manual ranges, field and road, which can only be changed while standing still. CVXDrive, Case IH, Steyr, New Holland, JD AutoPowr, CLAAS CMATIC, Deutz TTV, Valtra Direct and Kubota KVT use 4 automatic ranges with almost unnoticeable shifting.
- Engine and transmission management offers Auto, economy and low rpm at transport speed, as well as Power, with a load limit and acceleration ramps from 1 – 4.
- The hand throttle provides two rpm memories, A and B. They are saved with the savegame, as on real tractors.
- Power-split efficiency models higher losses in the hydrostatic section, affecting pulling force and fuel consumption.
- When the PTO is working, the engine drops slightly under load instead of remaining locked to PTO rpm.
- Hydraulic functions increase engine rpm for tipping, loader work, linkage and folding, then return the engine to idle afterwards.
- Press Left Alt + P to open the own window. The Transmission tab displays live rpm and target, engine load, efficiency, hydrostatic share and a range strip. The Settings tab contains the modules, the vehicles, the CVT profile for each brand and settings that can be applied at once. The Panel tab controls on / off, text size and mouse movement.
- The CVT module switches off automatically when CVT Addon, RealismAddon Gearbox or VCA is active.
- Zasty HUD displays the range and hand throttle. When the HUD is active, the panel is hidden.
- Multiplayer supported.
Keys
- Left Alt + P: Real Powertrain window
- Left Alt + Up / Down arrow: Hand throttle, hold
These key assignments are the defaults. When the game or another mod already uses one, open Options > Controls and choose another key to prevent conflicts.
Changelog
- V1.4.0.0
New: PTO by hand throttle. Activating a PTO implement no longer locks the engine to PTO rpm. The engine remains at idle or at the selected hand throttle, while you set the rpm with the hand throttle or the A/B memories. Standard PTO, 540/1000, requires about 85 – 95% of the tractor’s max rpm. Eco PTO, 540E/1000E, uses about 70 – 75% and is selected automatically for tedders, rakes and spreaders. Rotors and PTO shafts rotate with engine rpm. If the PTO rpm falls below about 78%, the implement operates more slowly and the “Low PTO rpm” warning appears. A PTO % chip is shown on the panel. This is on by default in Realistic mode and off in Arcade. It has a separate switch in Settings, Left Alt + P. The AI helper retains the game’s normal behaviour. Compatibility Real Vehicle Dynamics: with both mods active, keep speed and the game’s cruise control hold the speed again. - V1.3.1.0
New: hydrostatic transmission. Combines, forage harvesters, telehandlers and other non-tractor machines using a continuous transmission are now identified as hydrostatic. Their gears 1 – 4 change at standstill instead of using a tractor CVT profile.
Fixed: with the engine running, CVT oil temperature no longer falls below about 40 °C. The oil cooler thermostat is now simulated, remaining closed up to 42 °C and fully open at 60 °C.
The “cold oil” warning now appears below 40 °C. - V1.1.2.0
Fixed: rpm and speed needles jumping, particularly uphill. Automatic ranges now change more calmly and remain in a range for at least 2 seconds. Engine rpm now respond smoothly to load instead of hunting.
Improved: rpm no longer fall to “choking” values. While under load, the engine retains enough rpm for pulling. On the road, the minimum is about 1150 – 1300 rpm, depending on the tractor. At top speed, ECO remains around 1450 – 1500 rpm.
New: Fendt VarioDrive. The Fendt 600/700/900/1000 now use one continuous, fully automatic range. The Fendt 200/300/500 retain two manual ranges, I Field / II Road, changed at standstill.
New: deceleration ramps 1 – 4 in the Transmission tab. These determine how strongly the engine brakes when the pedal is released, like a real CVT. Ramp 2 = game default.
New: keep speed for tractors with a manual gearbox, requested by the community. It is off by default and can be enabled in Settings > “Keep speed on manual gearboxes”. For these tractors, only keep speed is added and nothing else changes.
Debug log: more values are now displayed. If something still jumps, enable Settings > “Write values to the log”, drive uphill and send me your log.txt.






