FS25 Field Sprayer Cleaning System V1.0.0.1
After the sprayer has been used, this mod leaves it dirty. You may continue using the same product, but switching to another product requires cleaning and takes some time.
Semi-Realistic and Realistic use the same steps, with time being the only difference. The mod should work with every sprayer, although not all of them have been tested. In my tests, everything worked perfectly.
Features
- Once the sprayer has been used and emptied, it stays dirty. The current product can still be used, while a product change requires cleaning.
- Progress, times, water and cleaner are displayed by the spraying overlay.
- The active mouse cursor can be moved and resized.
- The controls menu allows the keys to be changed.
Preparation
Empty all spraying agent from the sprayer. For rinsing, start the engine and unfold the boom completely.
Filling with water
At a suitable water source, press R. Every cycle uses 15% of the tank capacity, and filling ends automatically.
Cleaner
2,000-litre cleaner IBCs can be bought in the shop for €10,000 and placed beside the sprayer.
The three cycles are carried out in this order: fresh water, water mixed with cleaner, and fresh water once more.
Cleaning
Use CTRL + ALT + P to start or pause the process. Filling and starting must be done manually for every cycle, because the following cycle does not start automatically.
Select mode
Select it in the options or press CTRL + ALT + M.
- Realistic: Each cycle has 7 minutes of circulation and 8 minutes of emptying, followed by spraying out.
- Semi-realistic: Each cycle has 20 seconds of circulation and 30 seconds of emptying.
Quick drain and testing
CTRL + ALT + L quickly drains the water without performing cleaning.
Changelog
- V1.0.0.1
Fendt Xylon adjustment.






