FS25 Real Power Train V1.3.1.0

FS15 Mods | FS17 Mods | FS19 Mods | FS22 Mods | FS25 Mods |
FS 25 Other

FS25 Real Power Train V1.3.1.0

Real Power Train brings realistic CVT behavior, engine and transmission management, hand-throttle control, power-split efficiency, and hydraulic load effects to the game. Multiplayer is supported, and the mod provides a configurable transmission window and panel.

Features

  • Brand-specific realistic CVT behavior: Fendt Vario and MF Dyna-VT use 2 manual ranges, field and road, which can only be switched while stopped. CVXDrive, Case IH, Steyr, New Holland, JD AutoPowr, CLAAS CMATIC, Deutz TTV, Valtra Direct, and Kubota KVT use 4 automatic ranges with almost unnoticeable shifts.
  • Engine and transmission management offers Auto, using economy and low rpm at transport speed, or Power, using a load limit and acceleration ramps 1-4.
  • The hand throttle has two rpm memories, A and B. They are saved with the savegame, just like on real tractors.
  • Power-split efficiency models increased losses in the hydrostatic part, influencing both pulling force and fuel use.
  • When the PTO is working, the engine drops slightly under load rather than remaining locked at PTO rpm.
  • Hydraulic work for tipping, the loader, linkage, and folding raises engine rpm. Afterwards, the engine returns to idle.
  • Open the own window with Left Alt + P. Its Transmission tab displays live rpm and target, engine load, efficiency, hydrostatic share, and a range strip. The Settings tab handles modules, managed vehicles, and each brand’s CVT profile, with changes applied at once. The Panel tab controls on or off, text size, and mouse movement.
  • The CVT module switches itself off whenever CVT Addon, RealismAddon Gearbox, or VCA is active.
  • Zasty HUD displays the range and hand throttle. When the HUD is active, the panel is hidden.
  • Multiplayer supported.

Controls

KEYS (default)

  • Left Alt + P: Real Powertrain window
  • Left Alt + Up / Down arrow: Hand throttle, hold

These are the default keys. Should a key already be assigned by the game or another mod, open Options > Controls and choose another key to prevent conflicts.

Changelog

  • V1.3.1.0
    New: hydrostatic transmission. Combines, forage harvesters, telehandlers, and other non-tractor machines with a continuous transmission are now recognised as hydrostatic. Their gears 1-4 change at a standstill instead of using a tractor CVT profile.
    Fixed: CVT oil temperature no longer falls below about 40 °C while the engine is running. The oil cooler thermostat is now simulated, remaining closed up to 42 °C and fully open at 60 °C.
    The “cold oil” warning now appears below 40 °C.
  • V1.1.2.0
    Fixed: rpm and speed needles jumping, particularly uphill. Automatic ranges now shift more calmly and remain in a range for at least 2 seconds. Engine rpm now follows the load smoothly rather than hunting.
    Improved: rpm no longer falls to “choking” values. During work under load, the engine maintains enough rpm to pull. On the road, the minimum is about 1150 – 1300 rpm, depending on the tractor. At top speed, ECO remains around 1450 – 1500 rpm.
    New: Fendt VarioDrive. Fendt 600/700/900/1000 tractors now use one continuous, fully automatic range. Fendt 200/300/500 tractors retain the two manual ranges, I Field and II Road, which are changed at a standstill.
    New: deceleration ramps 1-4 in the Transmission tab. They define how strongly the engine brakes after releasing the pedal, like a real CVT. Ramp 2 = game default.
    New: keep speed for tractors with a manual gearbox, as requested by the community. It is off by default. Enable it in Settings > “Keep speed on manual gearboxes”. These tractors receive only keep speed, and nothing else changes.
    Debug log: more values are now displayed. If something still jumps, enable Settings > “Write values to the log”, drive up a hill, and send me your log.txt.
  • V1.1.1.0
    New: Keep speed, requested by the community. Release the pedal and the tractor holds its previous speed, like the drive lever on real CVT tractors. Accelerate to increase speed, brake to reduce it, then release again to hold the new speed.
    It works both forward and in reverse. Forward movement uses the game’s cruise control. In reverse, the mod presses the pedal for you and adjusts it to maintain speed. It releases control when you accelerate, brake, use the cruise control keys, or stop the tractor.
    When keep speed releases, your own cruise control speed is restored.
    Switch it on or off in the window with Left Alt + P, in the Transmission tab. The setting is saved per player in modSettings.
    The panel shows KS / KS active, and the window displays it as a chip.
    Multiplayer supported.
    IMPORTANT: Keep speed has NO default key. To switch it on or off while driving, bind a key in Options > Controls > “Keep speed (on/off)”.
    Keep speed works together with CVT management. If it does not work on a combine, or another machine with a CVT, open the mod window with Left Alt + P, then go to Settings > Vehicles and select “All”. By default, only tractors are managed.

Author: zasty chalk, ryankd233, Chronak28
This content was uploaded by website visitors. If you notice any mistake, please let us know.


Finding a game interesting after investing 300 hours into it can become a bit challenging. But with mods as long as there is a new update is assured, you are guaranteed a few more hours of new exciting gameplay. FS 25 Other Mods are one of the greatest upgrades and can make your game unique. Downloading and adding FS25 Real Power Train V1.3.1.0 Mod to your game is not difficult at all - you simply need to save a file and run it.



You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *