FS25 Temperature Controlled Box Storage V1.0.2.0
A building equipped with temperature-controlled storage, ventilation management and independent lighting systems.
Features
- A 20 x 24 m portal-frame shed with juniper green cladding, 10 m eaves, a spray-foamed roof and precast concrete panels fitted inside
- An insulated 6 m sectional roller door with header box and switch, together with working personnel and plant room doors
- The rear plant room contains a mezzanine with stairs, three full-height evaporator units, insulated pipework, isolators and distribution boards, plus a walk-in MCC panel with opening doors, drives, PLC, contactors, breakers and wiring inside
- Overhead air ducts are fitted with six spinning circulation fans, three outside condensers, weather louvres, temperature sensors and cabling, along with rodent bait stations and many small details
Ventilation control
- Use the fan control box in the plant room to switch the FAN 1, 2 and 3 groups on or off
- The fans spin up and coast down realistically, producing sound and flashing run lamps during startup
- A large control screen displays air flow, evaporators, condensers, crop probe temperatures and trends
- The fans are switched off when the building is first bought
Object storage (shop option)
- Crop boxes and pallets can be stored by placing them in the worn yellow LOADING BAY in front of the door
- Boxes stack 8 high inside the store, starting at the back and moving forward, while a clear walkway remains to the plant room
- Unloaded boxes appear two high in the UNLOAD AREA on the apron
- Select “No” in the shop to purchase a cheaper plain store without object storage
Lights
- Separate switches operate the store lights, plant room lights and an outside yard spotlight
Specifications
- Price: 185,000
- Category: Sheds / Storage
Changelog
- V1.0.2.0
- Fixed: the loading bay markings prompt now appears when standing beside either yellow bollard at the roller door
- Ceiling lamps now hang from the roof rather than floating below it
- Circulation fans are suspended from galvanised drop rods with ceiling plates
- Air ducts now use proper trapeze hangers, and every hanger rod reaches the rafters
- Gutters are now open channels with stop ends and outlets, positioned beneath the roof edge; downpipes connect to them
- Added a new click spot at the yellow bollards for removing or showing the loading bay markings
- Fixed flickering textures on the door frames and the long walls / gable ends
- Fixed darker patches on the wall cladding by correcting the inverted sheet faces
- Light switches now stand upright on the wall and face the correct way; the plant room switch was moved to the handle side of the door
- The yard light has been changed to the TerraLED 20W spotlight
- Fans now spin up and coast down with sound and a flashing run lamp; they are switched off when bought
- The fan control box door now opens correctly
- Removed the hazard floor mat from in front of the MCC panel
- Added an O&M manual tube beside the fan control box
