FS25 Car Wash V1.4.0.0
This complete car wash is made for vehicles and machines. Drive inside, press start, and the washing process begins.
Features
- A conveyor belt and guide rail automatically pull the vehicle through the wash.
- The foam arch, roof brushes and side brushes adjust to the vehicle’s shape. Rinsing and fan drying are included.
- The roller gate opens and closes by itself.
- A card terminal provides start and stop controls and displays the duration of the wash.
- Restarting the program automatically returns the vehicle to the beginning, where it is washed again.
- Vehicles are really cleaned during the process, as dirt is removed while they are being washed.
Specifications
- Purchase price: 120,000
- Upkeep: 120 per day
- Building dimensions: 5.4 m inside width and approximately 6.9 m in height.
- Required space, including a concrete slab with ramps: 8 m wide x 62 m long.
- Maximum vehicle dimensions: 4.66 m wide, including mirrors and header, 5.35 m high above the belt, and 22 m long. Combinations are included.
- Multiplayer: tested on a server, but not yet tested with several players at the same time.
- PC/Mac only, no console.
Version 1.3.2.0
Redistributing the mod, removing its assets or reusing them without permission is not allowed.
V1.4.0.0
- NEW
AutoDrive support has been added. AD vehicles stop at the AD destination on the lane, are washed, and then continue automatically. This also applies to the parking spot when one is set in AD.
The new key is “AD: Drive to car wash”, with Ctrl + W as the default. The vehicle automatically drives to the AD destination at the car wash. The destination name is irrelevant, and the key can be changed in the controls settings.
Combinations up to 30 m long can now go through the wash instead of the previous 22 m. The building itself remains unchanged, so long combinations protrude at the front and rear.
A map icon has been added under the category “Other”. Clicking the icon teleports you to the terminal.
Flexible spiral cables are now fitted to the top and side wash brushes and to the dryer. They move as the equipment is raised and lowered.
New junction boxes are located on the side brushes and face the tower. A cable runs from the tower to each box. - IMPROVED
Dryer: the silver rails now use the new wash portal shape, while the junction boxes and conduits leading to the fans are more modern.
The cable mounts on top of the portals and dryer have been redesigned.
Foam arch: the pipes are secured with clamps like those on the water arch, new brackets have been fitted, the supports have no gaps, and protruding parts have been removed.
The lift drive motors were removed because they no longer had a function. - FIXED
The dryer towers and posts previously had no collision. They are solid now.
Flickering on the side brush carriages has been fixed. - RECOMMENDATION FOR AUTODRIVE
Set the AD destination, or holding point, exactly at the entrance by the roller door, slightly farther inside the car wash, but not in front of the roller door. The vehicle stops there and the wash starts reliably.
