FS25 Irrigation System V1.0.0.0
In Farming Simulator 25, this mod gives rain and heat an impact on your crops. Every field has its own moisture level, and crop yield is affected when the soil remains too dry for too long.
Features
- Field moisture is restored by rain and reduced by sunlight and heat.
- If crops remain too dry for too long, they eventually wilt and produce a lower yield at harvest.
- While you are on a field, the “Soil and Crop” panel displays its current moisture level.
- Use
Alt + Mto open a map of the moisture level across the entire farm. Press it again to show the losses. - The irrigation reel includes a modeled gun cart with no brand.
- Its hose measures 350 m, and the tank has a capacity of 350 m³.
- You can fill the irrigation reel at a water station, using a water tanker, or directly from a river.
- Position the irrigation reel at the field edge, keeping the cart mounted at the rear.
- In the tractor, press
X, or pressRwhile on foot, and select the side from which the hose should extend. The turret swivels and the cart follows. - Unhitch the irrigation reel, then reverse the tractor toward the cart’s drawbar. The cart hitches automatically.
- Move forward slowly to unroll the hose. Keep below 6 km/h, because the hose brakes beyond that speed and breaks above 9 km/h.
- After unhitching the cart, press
Rto begin rewinding. The reel brings the cart back while the gun waters a strip approximately 56 m wide. - The watered soil appears dark and wet for around twelve hours.
- When the work is finished, a message reports the amount of water applied, the area and the application rate in millimetres.
- Press
Xonce to fold the equipment, returning everything to transport position.
Specifications
- Hose length: 350 m
- Tank capacity: 350 m³
- Watered strip width: approximately 56 m
- Maximum hose-unrolling speed: 6 km/h
- Hose breaks above: 9 km/h
- Soil moisture duration: around twelve hours
If you encounter a bug, send me your log.txt; it helps me a lot.
