FS25 Ap0lLos Scania Transport Pack V1.0.0.4
Ap0lLo’s Scania Transport Pack brings together converted and modernized vehicles, trailers, containers, and equipment for processing wood.
Features
- The pack contains 6 Scania trucks: hook-lift (HKL), tanker, Krone curtain-sider, semi-truck (fifth wheel), timber transport, and livestock transport.
- There are 7 semi-trailers: livestock transport, low-loader, container transport, Fliegl tipper, ProfiLiner, timber transport, and “The Beast”.
- 5 turntable trailers are included: livestock transport, tanker, Krone curtain-sider, timber transport, and the Hüffermann container transporter.
- The 11 ITRunner containers are tipper, grain, grain with tarp, tanker, timber, bales, grain & general transport, manure spreader, forage/chaff, slurry, and the Kuhn feed mixer.
- Wood-processing equipment is also part of the pack.
- The Schäffer telehandler has a selectable design and rotating beacon, and works with front-loader attachments.
- A TFK200 stump grinder and a log grapple are included.
Hüffermann Trailer
- Using the standard
Xfolding key, the container’s attachment point can be shifted so that the trailer can be unhitched. - Separate hitching and unhitching controls may be assigned, meaning the attachment point does not have to be moved.
- This attachment point method leaves the container selectable and makes it possible to fill the trailer at a silo.
- Adjusted tires and lights are included, as are side marker lights that flash together with the turn signals.
- The speedometer and radio are taken from the Scania. Photos of them were made and installed in this model.
Recommended mods: The low-loader pack by HR Forst & Fahrzeugbau, as well as his Ponsse Scorpion.
Changelog
V1.0.0.4
- The fender turn signals have been completely replaced.
- The standard grille was modified once more and the color scheme adjusted because graphical glitches could be seen from a distance.
- Revised dirt textures have been applied to all vehicles, including their attachments.
- All trailers now have standard FS25 sounds, including suspension movement and rattling while driving.
- Configurable decorative lights were added to the Scania logo and to the trim strips on both the left and right sides.
- A flatbed body was fitted to both the Scania truck and the turntable trailer.
Version 1.0.0.1
- Sounds, engine power, transmissions, and weights were revised.
- The textures were revised.
- Old shaders were removed and replaced by LS25 shaders.
- Wheel nut cover textures were revised.
- The reversing camera monitor was removed; its image is now shown realistically on the radio’s screen.
- Original Scania tail lights were installed on every model except the semi-truck.
- New company logos were added.
- A second Griffin emblem was added to the cab on the Next Gen.
- “Droplet” details were added to the vehicles.
- The old Hüffermann unit was retired and completely rebuilt; its functions remain the same, while the visual design is entirely new.
- This Hüffermann unit may not be re-uploaded; if it appears elsewhere, support will not be provided for issues arising from it.
- The rollers on the hook-lift (HKL) body now turn while the container is pulled up; compatibility with other containers cannot be guaranteed.
- The containers included in this pack work, of course.
- The textures of “The Beast” were completely revised.
- At the rear, the hook-lift chassis for the timber and tank containers was widened, and the rollers were repositioned accordingly.
