FS25 Auto Leveler – Landscaping Terraformer, Slopes & Roads V1.1.0.0
Auto Leveler provides tools for creating flat planes, ramps, and roads in Farming Simulator 25. Mark boundary points, preview the elevation plane in real time, and apply the terraforming with [Enter].
To activate the Auto Leveler, enter the Construction Menu and ensure you are on the main overview/selection screen, without any active building or specific landscaping brush selected. Press [J] to open the mod interface and start creating custom planes, ramps, or roads. If you have a building or landscaping tool selected, press [ESC] to return to the main construction menu screen, then press [J] to activate the mod.
Features
- Create large construction pads, yard expansions, and flat building sites in seconds.
- 100% flat and level terrain without uneven bumps, glitches, or holes under sheds, silos, and factories.
- Smooth transition slopes with automatic edge blending, called Talude, of 2m, 4m, or 6m.
- 3D ramp builder with precise slope percentage readouts and adjustable width for connecting elevated yards and roads.
- 3D dirt road builder for tracing natural curved roads following the terrain contours, with adjustable width from 3m to 8m and automatic clearing of grass, rocks, and field foliage.
- Real-time area (m²) and estimated cost preview.
- 3D holographic plane with real-time elevation preview and volumetric posts showing the exact target height.
- Auto 90°/45° alignment and square mode with magnetic snap and a Neon Green guide line to align with Point 1.
- Close polygons by clicking directly on Point 1 or double-clicking anywhere.
- Vertical cuts or smooth transitional slopes of 2m, 4m, or 6m for natural terrain blending.
- 3D ramp builder with adjustable road width from 2m to 30m and real-time slope percentage calculation.
- 3D dirt road and path builder with consecutive points, smooth spline curves, adjustable width from 3m to 8m, and automatic dirt ground painting.
- Raise or lower the entire flat plane or individual ramp and road points using the Up and Down Arrow keys.
- Real-time m² area calculation and estimated cost preview.
- Press
'Y'to place and mark points on the terrain. - Press
'R'to drag and adjust marked points directly on the ground.
Controls
[J]: Activate / Deactivate Auto Leveler inside Construction Mode.[H]: Switch Mode, 3D Flat Plane, 3D Ramp, or 3D Road.[X]: Toggle Alignment, Free Drawing or 90°/45° Orthogonal Snap.[Y]: Add Points Mode.[R]: Move / Drag Marked Points.[T]: Cycle Edge Finish, Vertical Cut, 2m Slope, 4m Slope, or 6m Slope.[Up Arrow]/[Down Arrow]: Increase / Decrease Height.[+]/[-]: Increase / Decrease Width for Ramp and Road.[Left Click]: Place point on terrain or click Point 1 to close polygon.[Double Click]: Quick lock and fix polygon points.[Backspace]/[Right Click]: Undo last placed point.[Enter]: Apply terraforming to the terrain.
Changelog
- V1.1.0.0
Added 3D Dirt Road Builder mode: create smooth, curved dirt roads that follow the terrain, with adjustable widths from 3 m to 8 m and automatic removal of grass, crops, and stones. - V1.1.0.0
Fixed overlapping key bindings for actions:[Y]is now used to add points, and[R]to move marked points.
