FS25 Lowloader Bale Autoload Pack V1.0.0.0
The Lowloader Bale Autoload Pack includes the Fliegl DTS 5.9 Bale Autoload and the Schwarzmüller Lowloader 4A Bale Autoload.
Fliegl DTS 5.9 Bale Autoload
- Price: from $30,500
- Category: Low Loaders, Bale Loaders
- Configuration: Standard or Bale Autoload
- Configuration: Side guards
- Autoload for round bales (125cm: 18 bales, 150cm: 14 bales, 180cm: 12 bales, cotton: 2 bales, 85cm: 69 bales)
- Autoload for square bales (180cm: 18 bales, 220cm & 240cm: 15 bales, cotton: 1 bale)
- Autoload for 70cm high square bales (180cm: 24 bales, 220cm & 240cm: 20 bales)
- Autoload for Hesston square bales 240cm: 10 bales
- Color choice for trailer
- Extended rim color choice
- Decal color choice
- Loading platform width adjustable via mouse control
Schwarzmüller Lowloader 4A Bale Autoload
- Price: from $60,000
- Category: Low Loaders, Bale Loaders
- Configuration: Standard or Bale Autoload
- Autoload for round bales (125cm: 22 bales, 150cm: 18 bales, 180cm: 16 bales, cotton: 3 bales)
- Autoload for square bales (180cm: 30 bales, 220cm & 240cm: 26 bales, cotton: 1 bale)
- Autoload for 70cm high square bales (180cm: 38 bales, 220cm & 240cm: 33 bales)
- Autoload for Hesston square bales 240cm: 14 bales
- Color choice for trailer
- Extended rim color choice
Important note
- Changed key binding: Fold/unfold ramps with
"O"(Toggle pipe), as"B"is used for the Bale Autoload working/transport position.
Important notes
- Bale Autoload is only available when configured in the workshop/garage.
1. Move the trailer into working position with "B". Bales can now be collected.
- In
"EASY"working mode, the trailer automatically collects bales located up to 4m beside the trailer. - In
"PRO"working mode, the bales must be placed on the trailer to be detected by Autoload.
The working mode can be changed at any time with "Ctrl"+"Z".
2. After collecting the bales, move the trailer into transport position with "B".
3. To unload, start unloading mode with "Z".
The unloading assistant controls are available during the unloading process. The bales can be moved in all directions and rotated on all axes.
Select the unloading position and unload the bales with "Z".
After unloading, end the unloading process with "Z".
The unloading process can be cancelled with "X".
